Hi everybody, I am not too much familiar with HW stuff and a little more than newbi on SW. I would like to use this ESP32C3 supermini board. For the pinout I found some different versions on the web and I wonder which one is the real one? My second question is: I want to use just 3 simple digital output signals to drive stepper motors, 5 digital inputs for switches and pulse buttons and the ...
Works with many different ultrasonic sensor models: SR04, SRF05, SRF06, DYP-ME007 & Parallax PING)))™. Option to interface with all but the SRF06 sensor using only one Arduino pin. Doesn't lag for a full second if no ping echo is received like all other ultrasonic libraries. Ping sensors consistently and reliably at up to 30 times per second. Compatible with the entire Arduino line-up (and ...
Disconnect the USB cable of the Arduino board from your computer. Select Tools > Port from the Arduino IDE menus. Take note of the ports, if any, listed in the menu. Close the Tools menu. The ports list is only updated when the Tools menu is re-opened, so this step is essential. Connect the Arduino board to your computer with a USB cable. Select Tools > Port from the Arduino IDE menus. - If a ...
Please don't hijack threads @araa-araaa. I have split your post out to its own topic. Hijacking is against the Arduino forum rules. The reason is that it may sidetrack the discussion, even preventing the creator of the topic from getting the assistance they need. It also reduces your own chances of getting assistance. This is basic forum etiquette, as explained in the "How to get the best out ...
Introduction The nRF24L01+ 2.4GHz transceiver modules are cheap and very effective but I have come across a few Threads in which people were having trouble with them so I thought it might be useful to gather together in one place a basic step-by-step sequence for getting them to work. EDIT 03 Feb 2021 - For this Tutorial install Version 1.1.7 of the RF24 library (available with the Arduino ...
Fortunately the amazing Arduino community picked up the slack by providing well maintained unofficial support software. The current recommendation is to use the excellent ATTinyCore boards platform, which has DigiSpark support.
What guidelines should I be aware of when I work with an Arduino board if I don't want to harm neither myself nor the board. The three kind of activity that requires touching the Arduino and what I'm asking about: Setting up wire, component layout or breadboard. Debugging a running setup. Moving, mounting up the board somewhere.
A typical Arduino ICSP header has six pins, arranged 2x3. The article Connecting the Programmer: In-Circuit Serial Programming (ICSP) at Sparkfun describes some of the functions of ICSP pins, which include MISO, MOSI, SCK, V+, Ground, and Reset. Each ICSP pin usually is cross-connected to another Arduino pin with the same name or function.
